Kalebodur Porcelain
TS-EN Technical
Characteristics		 Standard TS-EN
14411 Annex H Group Blb 		Kalebodur
Floor Tiles
ISO 10545-2
Length and Width (L=cm, S=cm²) 190 < S < 410 ± 0.75%
S > 410 ± 0.6%		 ± 0.4%
Thickness ± 5% ± 4%
ISO 10545-2 Rectangularity ±0.6% ±0,4%
ISO 10545-2 Straightness of Sides ±0.5% ±0,3%
ISO 10545-2 Surface Flatness ±0.5% ± 0,3%
ISO 10545-3 Water Absorption E < 0,5
Individual Max. 0,6%		 < 0,2%
ISO 10545-4
Breaking Strength, in N
Thickness > 7,5 mm Not less 1300 Not less 1300
Thickness < 7,5 mm Not less 700 Not less 700
ISO 10545-4 Modules of Rapture (N/mm²) Min. 35 Individual Min. 32 Average 45
ISO 10545-6 Resistance to Deep Abrasion
Unglazed Tiles Only		 Max.175 mm³ Average 130
ISO 10545-7 Abrasion Resistance Report abrasion class and cycles -
ISO 10545-8 Coefficient of Linear Thermal Expansion Test method available Pass
ISO 10545-5 Impact Resistance Test method available -
ISO 10545-9 Resistance to Thermal Shock Test method available Pass
ISO 10545-11 Crazing Resistance in Glazed Tiles Required Pass
ISO 10545-12 Frost Resistance Required Pass
ISO 10545-13
Resistance to Chemicals
Resistance to low concentrations of acids and alkalis
Glazed tiles - unglazed tiles		 Manufacturer to state classification Pass
Resistance to high concentrations of acids and alkalis
Glazed tiles - unglazed tiles		 Test method available Pass
ISO 10545-13
Resistance to Household Chemicals and Swimming Pool Salts
a) Glazed tiles Min. GB Pass
b) Unglazed tiles Min. UB Pass
ISO 10545-14
Resistance to staining
a) Glazed tiles Min. Class 3 Pass
b) Unglazed tiles Test method is available  
DIN 51130 Ramp Slip Resistance (Oil / Wet) Where required -
The numbers beside Kalebodur Ceramic Tiles indicate the abrasion Resistance of the ceramic surface according to Turkish and European Standard TS-EN ISO 10545-7.
P.E.I - 1 Suitable for walls and bedroom and bathroom floors.
P.E.I - 2 Suitable for light traffic environments like the floors of a house.
P.E.I - 3 Suitable for moderately heavy traffic area floors like the entrance and the corridor.
P.E.I - 4 Suitable for heavy traffic area floors like restaurant, shopping stores, etc.
P.E.I - 5 Suitable for floors subject to heavy foot traffic and abrasion, such as shops, hotels, restaurants, offices, schools, exhibition halls, etc.